Why TKFLO Vertical Turbine Pumps?

· Specialized production Manufactory for Vertical Turbine Pump
· Focus on technological innovation, Over Industry leading level
· Good experience at Domestic and oversea market
· Carefully paint  for Good appearance
· Years of International service standards, Engineer one-to-one service
· Corrosion resistance main part material, SKF bearing, thordon bearings suitable for sea water.
· Excellent design for high Efficiency save energy for you. 
· Flexible installation method suitable for different site.
· Stable running, Easy to install and maintain.

Vertical Turbine Long shaft Pump is the main product of TKFLO, with many years of production experience, and constantly improve and improve according to the needs of the market. At present, the product can adapt to a wide range of customers can meet a variety of working condition.

TKFLO Vertical Turbine pumps served for aquaculture desalination project, Water supply project industry plant and municipal administration in Australian. This Project is for the irrigation and the length of pumps reaches to 16 meter. In such a long length, still excellent to meet the smooth operation of pump, requires a high level of technology.

• Pump type: Vertical turbine pump ;
• Pump model: 600VTP-25
• Capacity: 3125m3/h  Head: 25meter;
• Pump length from the base plate to the strainer: 16 meter;
• Use for Irrigation project in Australian.

Structure Advantage

• &#187 The inlet shall be vertical downward and the outlet horizontal above or under the base.
• &#187 The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: non-adjustable, semi adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
• &#187 On the basis o Pump, this type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
• &#187 The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
• &#187 It applies water lubricating rubber bearing and packing seal.
• &#187 The motor generally applies standard Y series tri-phase asynchronous motor, or HSM type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with anti- reverse device, effectively avoiding reverse of pump.

※ More detail about our VTP series Long Shaft Vertical Turbine Pump for curve and dimension and data sheet please contact Tongke.

Note before order

1.The temperature of medium shall not be higher than 60 .
2.The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3.For VTP type pump, the content of suspended substances in the medium shall be less than 150 mg/L;  for VTP type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4 VTP type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two stage pump, lubricant pressure shall not be less than operational pressure.